lcc, tlcc www.vishay.com vishay dale thin film revision: 20-oct-11 1 document number: 60012 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 hermetic, 50 mil pitch, leadless thin film chip resistor, surface mount network vishay dale thin film offers a wide resistance range in 16, 20, and 24 terminal hermetic leadless chip carriers. the standard circuits in the ohmic ra nges listed below will utilize the outstanding wraparound terminations developed for chip resistors. should one of the standards not fit your application, consult the applications engineering group as we may be able to meet your requirements. features ? high purity alumina su bstrate for high power dissipation ? leach resistant terminati ons with nickel barrier ? 16, 20, 24 terminal gold plated wraparound true hermetic packaging ? military/aerospace ? hermetically sealed ? isolated/bussed circuits ? ideal for military/aerospace applications ? compliant to rohs directive 2002/95/ec ? halogen-free according to iec 61249-2-21 definition note * pb containing terminations are not rohs compliant, exemptions may apply typical performance note ? resistance range: noted on schematics actual size absolute tracking tcr 25 5 absolute ratio tol. 0.1 na schematic 10 9 8 7 15 16 1 2 14 11 12 13 3 6 5 4 15 14 13 12 11 10 22 23 24 1 2 3 21 16 17 18 19 20 4 9 8 7 6 5 13 12 11 10 9 19 20 1 2 3 14 15 16 17 18 8 7 6 5 4 15 14 13 12 11 10 22 23 24 1 2 3 21 16 17 18 19 20 4 9 8 7 6 5 10 9 8 7 15 16 1 2 14 11 12 13 3 6 5 4 13 12 11 10 9 19 20 1 2 3 14 15 16 17 18 8 7 6 5 4 10 9 8 7 15 16 1 2 14 11 12 13 3 6 5 4 15 14 13 12 11 10 22 23 24 1 2 3 21 16 17 18 19 20 4 9 8 7 6 5 13 12 11 10 9 19 20 1 2 3 14 15 16 17 18 8 7 6 5 4 tlcc 16 a01 1 k to 100 k tlcc 20 a01 10 k to 200 k tlcc 24 a01 1 k to 100 k tlcc 16 a03 100 to 100 k tlcc 20 a03 10 to 120 k tlcc 24 a03 1 k to 100 k tlcc 16 a06 100 to 100 k tlcc 20 a06 1 k to 110 k tlcc 24 a06 1 k to 100 k (10 isolated resistors) (19 resistors + 1 common point) 14 15 16 17 18 8 7 6 5 4 19 20 1 2 3 13 12 11 10 9 14 15 16 17 18 8 7 6 5 4 19 20 1 2 3 13 12 11 10 9 10 to 250 k 10 to 200 k lcc 20a lcc 20b
lcc, tlcc www.vishay.com vishay dale thin film revision: 20-oct-11 2 document number: 60012 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? tantalum nitride film is custom, consult factory standard electrical specifications test specifications conditions material passivated nichrome - pin/lead number 16, 20, 24 - resistance range 10 ? to 250 k ? per resistor - tcr: absolute 25 ppm/c to 300 ppm/c - 55 c to + 125 c tcr: tracking 5 ppm/c - 55 c to + 125 c tolerance: absolute 0.1 % to 1.0 % + 25 c tolerance: ratio n/a - power rating: resistor 50 mw max. = common circuits maximum at + 70 c 100 mw max. = isolated circuits power rating: package 500 mw maximum at + 70 c stability: absolute ? r 0.05 % 2000 h at + 70 c stability: ratio -- voltage coefficient < 5 ppm/v (typical) - working voltage 100 v max. not to exceed - operating temperature range - 55 c to + 125 c - storage temperature range - 55 c to + 150 c - noise < - 30 db - thermal emf 0.008 v/c - shelf life stability: absolute ? r 0.01 % 1 year at + 25 c shelf life stability: ratio -- dimensions in inches and millimeters dimension 16 pins 20 pins 24 pins inches millimeters inches mi llimeters inches millimeters a 0.050 1.27 0.050 1.27 0.050 1.27 b 0.300 7.26 0.350 8.89 0.400 10.16 c 0.300 7.26 0.350 8.89 0.400 10.16 d 0.077 1.96 0.077 1.96 0.077 1.96 e 0.025 0.635 0.025 0.635 0.025 0.635 f 0.050 1.27 0.050 1.27 0.050 1.27 g 0.040 1.02 0.040 1.02 0.040 1.02 h 0.020 0.508 0.020 0.508 0.020 0.508 p x r b d max. g typ. a typ. e typ. h index corner f c terminal 1 indicator terminal 1 0.008" (0.203) r typ.
lcc, tlcc www.vishay.com vishay dale thin film revision: 20-oct-11 3 document number: 60012 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) lcc or lcct only av ailable in 20 pin size mechanical specifications resistive element passivated nichrome substrate material alumina body ceramic terminals gold over nickel marking resistance to solvents per mil-prf-83401 tin lead option sn63 lead (pb)-free option 96.5 % sn, 3.0 % ag, 0.5 % cu tin lead and lead (pb)-free hot solder dip global part number information new global part numb ering: tlcc20ae1002buf global model (4 or 5 digits) terminal count (1) schematics (4 or 5 digits) tcr characteristics resistance tolerance packaging lcc (tin lead) lcct (lead (pb)-free) (e1) 20 20 a = isolated resistors b = resistor to common bus e = 25 ppm/c h = 50 ppm/c k = 100 ppm/c m = 300 ppm/c first 3 digits are significant figures and the last digit specifies the number of zeros to follow. example: 10r0 = 10 ? 12r5 = 12.5 ? 1000 = 100 ? 1001 = 1000 ? b = 0.1 % d = 0.5 % f = 1 % g = 2 % j = 5 % k = 10 % s = special tape and reel t0 = 100 min., 100 mult t1 = 1000 min., 1000 mult t3 = 300 min., 300 mult t5 = 500 min., 500 mult tf = full reel 2000 ts = 100 min., 1 mult uf = tubed tlcc (tin lead) tlcct (lead (pb)-free) (e1) 16 20 24 16 20 24 a01 = resistor to common bus a03 = isolated parallel resistor a06 = isolated adjacent resistor historical part numb er example: lc20bk1003j (for reference purposes only) lc 20 b k 1003 j series pins schematic tcr characteristic resistance tolerance ct1 6a0 1k 1003 k tlc uf c20 a e 1002 b tlc uf
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
